Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Reisen in Schweif
#39
Hallo Walfänger,

mit diesen Einstellungen emulierst du einen 486 mit 66Mhz, VGA Karte, Soundblaster Pro und deutscher Keyboardeinstellung. Sternenschweif läuft damit sehr flüssig:



# This is the configurationfile for DOSBox 0.74. (Please use the latest version of DOSBox)
# Lines starting with a # are commentlines and are ignored by DOSBox.
# They are used to (briefly) document the effect of each option.

[sdl]
#      fullscreen: Start dosbox directly in fullscreen. (Press ALT-Enter to go back)
#      fulldouble: Use double buffering in fullscreen. It can reduce screen flickering, but it can also result in a slow DOSBox.
#  fullresolution: What resolution to use for fullscreen: original or fixed size (e.g. 1024x768).
#                    Using your monitor's native resolution with aspect=true might give the best results.
#                    If you end up with small window on a large screen, try an output different from surface.
# windowresolution: Scale the window to this size IF the output device supports hardware scaling.
#                    (output=surface does not!)
#          output: What video system to use for output.
#                  Possible values: surface, overlay, opengl, openglnb, ddraw.
#        autolock: Mouse will automatically lock, if you click on the screen. (Press CTRL-F10 to unlock)
#      sensitivity: Mouse sensitivity.
#      waitonerror: Wait before closing the console if dosbox has an error.
#        priority: Priority levels for dosbox. Second entry behind the comma is for when dosbox is not focused/minimized.
#                    pause is only valid for the second entry.
#                  Possible values: lowest, lower, normal, higher, highest, pause.
#      mapperfile: File used to load/save the key/event mappings from. Resetmapper only works with the defaul value.
#    usescancodes: Avoid usage of symkeys, might not work on all operating systems.

fullscreen=true
fulldouble=false
fullresolution=0x0
windowresolution=640x400
output=ddraw
autolock=true
sensitivity=100
waitonerror=true
priority=higher,normal
mapperfile=mapper-0.74.map
usescancodes=true

[dosbox]
# language: Select another language file.
#  machine: The type of machine tries to emulate.
#          Possible values: hercules, cga, tandy, pcjr, ega, vgaonly, svga_s3, svga_et3000, svga_et4000, svga_paradise, vesa_nolfb, vesa_oldvbe.
# captures: Directory where things like wave, midi, screenshot get captured.
#  memsize: Amount of memory DOSBox has in megabytes.
#            This value is best left at its default to avoid problems with some games,
#            though few games might require a higher value.
#            There is generally no speed advantage when raising this value.

language=
machine=vgaonly
captures=capture
memsize=16

[render]
# frameskip: How many frames DOSBox skips before drawing one.
#    aspect: Do aspect correction, if your output method doesn't support scaling this can slow things down!.
#    scaler: Scaler used to enlarge/enhance low resolution modes.
#              If 'forced' is appended, then the scaler will be used even if the result might not be desired.
#            Possible values: none, normal2x, normal3x, advmame2x, advmame3x, advinterp2x, advinterp3x, hq2x, hq3x, 2xsai, super2xsai, supereagle, tv2x, tv3x, rgb2x, rgb3x, scan2x, scan3x.

frameskip=0
aspect=false
scaler=normal3x

[cpu]
#      core: CPU Core used in emulation. auto will switch to dynamic if available and appropriate.
#            Possible values: auto, dynamic, normal, simple.
#  cputype: CPU Type used in emulation. auto is the fastest choice.
#            Possible values: auto, 386, 386_slow, 486_slow, pentium_slow, 386_prefetch.
#    cycles: Amount of instructions DOSBox tries to emulate each millisecond.
#            Setting this value too high results in sound dropouts and lags.
#            Cycles can be set in 3 ways:
#              'auto'          tries to guess what a game needs.
#                              It usually works, but can fail for certain games.
#              'fixed #number' will set a fixed amount of cycles. This is what you usually need if 'auto' fails.
#                              (Example: fixed 4000).
#              'max'          will allocate as much cycles as your computer is able to handle.
#           
#            Possible values: auto, fixed, max.
#  cycleup: Amount of cycles to decrease/increase with keycombo.(CTRL-F11/CTRL-F12)
# cycledown: Setting it lower than 100 will be a percentage.

core=dynamic
cputype=486
cycles=fixed 12000
cycleup=1000
cycledown=1000

[mixer]
#  nosound: Enable silent mode, sound is still emulated though.
#      rate: Mixer sample rate, setting any device's rate higher than this will probably lower their sound quality.
#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
# blocksize: Mixer block size, larger blocks might help sound stuttering but sound will also be more lagged.
#            Possible values: 1024, 2048, 4096, 8192, 512, 256.
# prebuffer: How many milliseconds of data to keep on top of the blocksize.

nosound=false
rate=44100
blocksize=1024
prebuffer=30

[midi]
#    mpu401: Type of MPU-401 to emulate.
#            Possible values: intelligent, uart, none.
# mididevice: Device that will receive the MIDI data from MPU-401.
#            Possible values: default, win32, alsa, oss, coreaudio, coremidi, none.
# midiconfig: Special configuration options for the device driver. This is usually the id of the device you want to use.
#              See the README/Manual for more details.

mpu401=intelligent
mididevice=default
midiconfig=

[sblaster]
#  sbtype: Type of Soundblaster to emulate. gb is Gameblaster.
#          Possible values: sb1, sb2, sbpro1, sbpro2, sb16, gb, none.
#  sbbase: The IO address of the soundblaster.
#          Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300.
#    irq: The IRQ number of the soundblaster.
#          Possible values: 7, 5, 3, 9, 10, 11, 12.
#    dma: The DMA number of the soundblaster.
#          Possible values: 1, 5, 0, 3, 6, 7.
#    hdma: The High DMA number of the soundblaster.
#          Possible values: 1, 5, 0, 3, 6, 7.
# sbmixer: Allow the soundblaster mixer to modify the DOSBox mixer.
# oplmode: Type of OPL emulation. On 'auto' the mode is determined by sblaster type. All OPL modes are Adlib-compatible, except for 'cms'.
#          Possible values: auto, cms, opl2, dualopl2, opl3, none.
#  oplemu: Provider for the OPL emulation. compat might provide better quality (see oplrate as well).
#          Possible values: default, compat, fast.
# oplrate: Sample rate of OPL music emulation. Use 49716 for highest quality (set the mixer rate accordingly).
#          Possible values: 44100, 49716, 48000, 32000, 22050, 16000, 11025, 8000.

sbtype=sbpro1
sbbase=220
irq=7
dma=1
hdma=5
sbmixer=true
oplmode=auto
oplemu=default
oplrate=44100

[gus]
#      gus: Enable the Gravis Ultrasound emulation.
#  gusrate: Sample rate of Ultrasound emulation.
#          Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
#  gusbase: The IO base address of the Gravis Ultrasound.
#          Possible values: 240, 220, 260, 280, 2a0, 2c0, 2e0, 300.
#  gusirq: The IRQ number of the Gravis Ultrasound.
#          Possible values: 5, 3, 7, 9, 10, 11, 12.
#  gusdma: The DMA channel of the Gravis Ultrasound.
#          Possible values: 3, 0, 1, 5, 6, 7.
# ultradir: Path to Ultrasound directory. In this directory
#          there should be a MIDI directory that contains
#          the patch files for GUS playback. Patch sets used
#          with Timidity should work fine.

gus=false
gusrate=44100
gusbase=240
gusirq=5
gusdma=3
ultradir=C:\ULTRASND

[speaker]
# pcspeaker: Enable PC-Speaker emulation.
#    pcrate: Sample rate of the PC-Speaker sound generation.
#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
#    tandy: Enable Tandy Sound System emulation. For 'auto', emulation is present only if machine is set to 'tandy'.
#            Possible values: auto, on, off.
# tandyrate: Sample rate of the Tandy 3-Voice generation.
#            Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
#    disney: Enable Disney Sound Source emulation. (Covox Voice Master and Speech Thing compatible).

pcspeaker=true
pcrate=44100
tandy=auto
tandyrate=44100
disney=true

[joystick]
# joysticktype: Type of joystick to emulate: auto (default), none,
#              2axis (supports two joysticks),
#              4axis (supports one joystick, first joystick used),
#              4axis_2 (supports one joystick, second joystick used),
#              fcs (Thrustmaster), ch (CH Flightstick).
#              none disables joystick emulation.
#              auto chooses emulation depending on real joystick(s).
#              (Remember to reset dosbox's mapperfile if you saved it earlier)
#              Possible values: auto, 2axis, 4axis, 4axis_2, fcs, ch, none.
#        timed: enable timed intervals for axis. Experiment with this option, if your joystick drifts (away).
#    autofire: continuously fires as long as you keep the button pressed.
#      swap34: swap the 3rd and the 4th axis. can be useful for certain joysticks.
#  buttonwrap: enable button wrapping at the number of emulated buttons.

joysticktype=auto
timed=true
autofire=false
swap34=false
buttonwrap=false

[serial]
# serial1: set type of device connected to com port.
#          Can be disabled, dummy, modem, nullmodem, directserial.
#          Additional parameters must be in the same line in the form of
#          parameter:value. Parameter for all types is irq (optional).
#          for directserial: realport (required), rxdelay (optional).
#                          (realport:COM1 realport:ttyS0).
#          for modem: listenport (optional).
#          for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
#                        transparent, port, inhsocket (all optional).
#          Example: serial1=modem listenport:5000
#          Possible values: dummy, disabled, modem, nullmodem, directserial.
# serial2: see serial1
#          Possible values: dummy, disabled, modem, nullmodem, directserial.
# serial3: see serial1
#          Possible values: dummy, disabled, modem, nullmodem, directserial.
# serial4: see serial1
#          Possible values: dummy, disabled, modem, nullmodem, directserial.

serial1=dummy
serial2=dummy
serial3=disabled
serial4=disabled

[dos]
#            xms: Enable XMS support.
#            ems: Enable EMS support.
#            umb: Enable UMB support.
# keyboardlayout: Language code of the keyboard layout (or none).

xms=true
ems=true
umb=true
keyboardlayout=gr

[ipx]
# ipx: Enable ipx over UDP/IP emulation.

ipx=false
Zitieren


Nachrichten in diesem Thema
Reisen in Schweif - von Hina - 09.09.2011, 21:51
RE: Reisen in Schweif - von Boronar - 09.09.2011, 21:55
RE: Reisen in Schweif - von Alter Ugdalf - 09.09.2011, 22:03
RE: Reisen in Schweif - von Walfänger - 05.02.2022, 23:12
RE: Reisen in Schweif - von Hina - 09.09.2011, 22:32
RE: Reisen in Schweif - von Alter Ugdalf - 10.09.2011, 01:42
RE: Reisen in Schweif - von Fury - 10.09.2011, 02:37
RE: Reisen in Schweif - von Hina - 10.09.2011, 07:44
RE: Reisen in Schweif - von Alter Ugdalf - 10.09.2011, 13:07
RE: Reisen in Schweif - von Hina - 10.09.2011, 14:00
RE: Reisen in Schweif - von thEClaw - 10.09.2011, 16:39
RE: Reisen in Schweif - von Nightwish76 - 16.05.2012, 21:15
RE: Reisen in Schweif - von Asgrimm - 17.05.2012, 09:09
RE: Reisen in Schweif - von Nightwish76 - 20.03.2013, 18:09
RE: Reisen in Schweif - von Nightwish76 - 17.05.2012, 11:11
RE: Reisen in Schweif - von Zurgrimm - 17.05.2012, 11:32
RE: Reisen in Schweif - von Alpha Zen - 17.05.2012, 13:36
RE: Reisen in Schweif - von Recke - 17.05.2012, 16:39
RE: Reisen in Schweif - von Eldarion - 21.03.2013, 20:53
RE: Reisen in Schweif - von Lippens die Ente - 07.09.2013, 21:38
RE: Reisen in Schweif - von Fíonlaighrí - 07.09.2013, 22:19
RE: Reisen in Schweif - von Werhoernchen - 26.03.2014, 19:22
RE: Reisen in Schweif - von Lippens die Ente - 07.09.2013, 23:10
RE: Reisen in Schweif - von Boronar - 07.09.2013, 23:28
RE: Reisen in Schweif - von Reg Schuh - 12.09.2013, 20:37
RE: Reisen in Schweif - von Lippens die Ente - 26.03.2014, 19:39
RE: Reisen in Schweif - von Werhoernchen - 26.03.2014, 19:53
RE: Reisen in Schweif - von Lippens die Ente - 26.03.2014, 20:51
RE: Reisen in Schweif - von Zurgrimm - 26.03.2014, 21:25
RE: Reisen in Schweif - von Recke - 27.03.2014, 19:40
RE: Reisen in Schweif - von wiese.hano - 07.11.2020, 13:03
RE: Reisen in Schweif - von Tiefhusen - 07.02.2022, 08:50
RE: Reisen in Schweif - von Walfänger - 07.02.2022, 22:29
RE: Reisen in Schweif - von Tiefhusen - 08.02.2022, 08:36
RE: Reisen in Schweif - von Walfänger - 08.02.2022, 10:41
RE: Reisen in Schweif - von Lippens die Ente - 08.02.2022, 18:50
RE: Reisen in Schweif - von wiese.hano - 10.02.2022, 11:52
RE: Reisen in Schweif - von Walfänger - 11.02.2022, 23:20
RE: Reisen in Schweif - von Mandur - 15.02.2022, 18:38
RE: Reisen in Schweif - von Mandur - 15.02.2022, 20:27
RE: Reisen in Schweif - von Walfänger - 16.02.2022, 12:04
RE: Reisen in Schweif - von Rabenaas - 16.02.2022, 19:47
RE: Reisen in Schweif - von Alrik Alrikson - 16.02.2022, 20:08
RE: Reisen in Schweif - von Rabenaas - 16.02.2022, 20:52
RE: Reisen in Schweif - von Alrik Alrikson - 16.02.2022, 22:48
RE: Reisen in Schweif - von Mandur - 17.02.2022, 05:57



Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste