Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Riva unter DFend erkennt CD nicht
#1
hi!

habe mir vor einigen tagen DSA III ersteigert. habe es auch auf einem anderen pc mit gleichen vorraussetzungen installiert, wo es ohne probleme läuft.

benutze windows xp und die dosbox sowie dfend, die ich beide hier runtergeladen habe.

die installation von Riva funktionierte ohne probleme. nur wenn ich das spiel starten will (egal ob einfach über die dosbox oder dfend) bekomme ich ständig die anzeige, dass ich die spiel cd einlegen soll, die sich allerdings schon im laufwerk befindet.

habe schon sämtliche ratschläge aus diesem forum angewendet, aber ohne erfolg.

vllt könnt ihr mir ja direkt helfen. wäre euch sehr dankbar.

glg
Brierley
Zitieren
#2
Hallo Brierley und willkommen. :wave:

Welche Versionen der DOSbox und DFend sind das denn, die du installiert hast?
In welche Verzeichnisse hast du DOSBox, DFend und Riva installiert?
Zum NLT-Wiki: http://nlt-wiki.crystals-dsa-foren.de/doku.php , Zum Drakensang-Wiki: http://drakensang-wiki.crystals-dsa-foren.de/doku.php
KEIN SUPPORT per E-Mail, PN, IRC, ICQ! Lest die Regeln und benutzt das Forum für sämtliche Anfragen! KEINE persönliche Betreuung!
Zitieren
#3
danke für das willkommen!

also bei dosbox ist es die version 0.65 und bei dfend 2.0.62.42

sowohl dosbox als auch dfend wurden jeweils in eigene verzeichnisse unter c:\programme installiert und riva direkt unter c:\RIVA
soweit scheint auch alles in ordnung zu sein. nur eben wenn ich starten will erscheint (schon in typischem dsa-look), ich soll die spiele cd einlegen...
Zitieren
#4
Gut, dann geh mal bitte im Windows Explorer in das DFend-Verzeichnis rein und dort in das Unterverzeichnis "Confs".
Dort lässt du dir den Inhalt der conf-Datei (die genauso heißt, wie das Profil im DFend) mit Notepad anzeigen und diesen Inhalt mit STRG-A und STRG-C kopieren und hier posten.
Dann kann ich sehen, wie DOSBox deine Laufwerke behandelt.
Zum NLT-Wiki: http://nlt-wiki.crystals-dsa-foren.de/doku.php , Zum Drakensang-Wiki: http://drakensang-wiki.crystals-dsa-foren.de/doku.php
KEIN SUPPORT per E-Mail, PN, IRC, ICQ! Lest die Regeln und benutzt das Forum für sämtliche Anfragen! KEINE persönliche Betreuung!
Zitieren
#5
hm...
ich kann zwar dfend im explorer öffnen, allerdings scheint das keine unterverzeichnisse zu haben...

jetzt hab ich was gefunden unter "dosbox.conf":

[sdl]
# fullscreen -- Start dosbox directly in fullscreen.
# fulldouble -- Use double buffering in fullscreen.
# fullresolution -- What resolution to use for fullscreen: original or fixed size (e.g. 1024x768).
# windowresolution -- Scale the window to this size IF the output device supports hardware scaling.
# output -- What to use for output: surface,overlay,opengl,openglnb,ddraw.
# autolock -- Mouse will automatically lock, if you click on the screen.
# sensitiviy -- Mouse sensitivity.
# waitonerror -- Wait before closing the console if dosbox has an error.
# priority -- Priority levels for dosbox: lowest,lower,normal,higher,highest.
# Second entry behind the comma is for when dosbox is not focused/minimized.
# mapperfile -- File used to load/save the key/event mappings from.
# usescancodes -- Avoid usage of symkeys, might not work on all operating systems.

fullscreen=false
fulldouble=false
fullresolution=640x480
windowresolution=320x240
output=surface
autolock=true
sensitivity=100
waitonerror=true
priority=higher,normal
mapperfile=mapper.txt
usescancodes=true

[dosbox]
# language -- Select another language file.
# memsize -- Amount of memory dosbox has in megabytes.
# machine -- The type of machine tries to emulate:hercules,cga,tandy,pcjr,vga.
# captures -- Directory where things like wave,midi,screenshot get captured.

language=
machine=vga
captures=capture
memsize=16

[render]
# frameskip -- How many frames dosbox skips before drawing one.
# aspect -- Do aspect correction, if your output method doesn't support scaling this can slow things down!.
# scaler -- Scaler used to enlarge/enhance low resolution modes.
# Supported are none,normal2x,normal3x,advmame2x,advmame3x,advinterp2x,advinterp3x,tv2x,tv3x,rgb2x,rgb3x,scan2x,scan3x.

frameskip=0
aspect=false
scaler=normal2x

[cpu]
# core -- CPU Core used in emulation: simple,normal,full,dynamic.
# cycles -- Amount of instructions dosbox tries to emulate each millisecond.
# Setting this higher than your machine can handle is bad!
# You can also let DOSBox guess the correct value by setting it to auto.
# Please note that this guessing feature is still experimental.
# cycleup -- Amount of cycles to increase/decrease with keycombo.
# cycledown Setting it lower than 100 will be a percentage.

core=dynamic
cycles=10000
cycleup=500
cycledown=20

[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
# probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
# but sound will also be more lagged.
# prebuffer -- How many milliseconds of data to keep on top of the blocksize.

nosound=false
rate=22050
blocksize=2048
prebuffer=10

[midi]
# mpu401 -- Type of MPU-401 to emulate: none, uart or intelligent.
# device -- Device that will receive the MIDI data from MPU-401.
# This can be default,alsa,oss,win32,coreaudio,none.
# config -- Special configuration options for the device. In Windows put
# the id of the device you want to use. See README for details.

mpu401=intelligent
device=default
config=

[sblaster]
# sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
# sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
# mixer -- Allow the soundblaster mixer to modify the dosbox mixer.
# oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
# On auto the mode is determined by sblaster type.
# All OPL modes are 'Adlib', except for CMS.
# oplrate -- Sample rate of OPL music emulation.

sbtype=sb16
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050

[gus]
# gus -- Enable the Gravis Ultrasound emulation.
# gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
# Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
# gusrate -- Sample rate of Ultrasound emulation.
# ultradir -- Path to Ultrasound directory. In this directory
# there should be a MIDI directory that contains
# the patch files for GUS playback. Patch sets used
# with Timidity should work fine.

gus=true
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND

[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy Sound System emulation (off,on,auto).
# For auto Tandysound emulation is present only if machine is set to tandy.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation.

pcspeaker=true
pcrate=22050
tandy=auto
tandyrate=22050
disney=true

[bios]
# joysticktype -- Type of joystick to emulate: none, 2axis, 4axis,
# fcs (Thrustmaster) ,ch (CH Flightstick).
# none disables joystick emulation.
# 2axis is the default and supports two joysticks.

joysticktype=2axis

[serial]
# serial1-4 -- set type of device connected to com port.
# Can be disabled, dummy, modem, directserial.
# Additional parameters must be in the same line in the form of
# parameter:value. Parameters for all types are irq, startbps, bytesize,
# stopbits, parity (all optional).
# for directserial: realport (required).
# for modem: listenport (optional).
# Example: serial1=modem listenport:5000

serial1=dummy
serial2=dummy
serial3=disabled
serial4=disabled

[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.
# umb -- Enable UMB support (false,true,max).

xms=true
ems=true
umb=true

[ipx]
# ipx -- Enable ipx over UDP/IP emulation.

ipx=false

[autoexec]
# Lines in this section will be run at startup.
Zitieren
#6
Nein, nicht DFend starten. :) Im DFend-Verzeichnis ist noch ein Verzeichnis Confs. Da gehst du rein und öffnest die Datei, die mit .conf endet.
Z.B. riva.conf

Mit DFend selber machst du gar nichts. Nur im Explorer bleiben.
Zum NLT-Wiki: http://nlt-wiki.crystals-dsa-foren.de/doku.php , Zum Drakensang-Wiki: http://drakensang-wiki.crystals-dsa-foren.de/doku.php
KEIN SUPPORT per E-Mail, PN, IRC, ICQ! Lest die Regeln und benutzt das Forum für sämtliche Anfragen! KEINE persönliche Betreuung!
Zitieren
#7
sry, aber auch im explorer wird mir für dfend kein unterverzeichnis angezeigt. wenn ich ins verzeichnis dfend gehe, zeigt er mir nur das programm selbst an, manuel sowie uninstall...
Zitieren
#8
Dann hast du wohl noch kein Profil für Riva im DFend angelegt, oder? :think:
Erstelle dir eins, indem du dich nach dieser Anleitung ab dem Abschnitt "Erstellung eines Profils" richtest.

Erst nach Profilerstellung wird dann die conf-Datei erzeugt.
Zum NLT-Wiki: http://nlt-wiki.crystals-dsa-foren.de/doku.php , Zum Drakensang-Wiki: http://drakensang-wiki.crystals-dsa-foren.de/doku.php
KEIN SUPPORT per E-Mail, PN, IRC, ICQ! Lest die Regeln und benutzt das Forum für sämtliche Anfragen! KEINE persönliche Betreuung!
Zitieren
#9
also hab dfend grade deinstalliert und wieder installiert und dann zum hundertsten mal ein profil für riva angelegt. jetzt zeigt er mir auch endlich die conf-datei an:

[sdl]
fullscreen=false
fulldouble=false
fullfixed=false
fullresolution=Default
output=surface
hwscale=1.00
autolock=false
sensitivity=100
waitonerror=true
priority=higher,normal
mapperfile=mapper.txt

[dosbox]
language=
machine=vga
captures=C:\Program Files\D-Fend\Capture
memsize=32

[render]
frameskip=0
aspect=false
scaler=normal2x

[cpu]
core=normal
cycles=15000
cycleup=500
cycledown=20

[mixer]
nosound=false
rate=22050
blocksize=2048
prebuffer=10

[midi]
mpu401=true
intelligent=true
device=default
config=

[sblaster]
type=sb16
base=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050

[gus]
gus=true
rate=22050
base=240
irq1=5
irq2=5
dma1=1
dma2=1
ultradir=C:\ULTRASND

[speaker]
pcspeaker=true
pcrate=22050
tandyrate=22050
disney=true

[dos]
xms=true
ems=true

[modem]
modem=false
listenport=23
comport=COM2

[directserial]
directserial=false
Comport=COM1
realport=1
defaultbps=1200
parity=N
bytesize=8
stopbit=1

[ipx]
ipx=false

[autoexec]
mount C "C:\" -ioctl
mount D "E:\" -t cdrom -ioctl
D:
cd\
cd DSAIII~4\DATA\
loadfix -64 RIVA_WIN.EXE
exit
Zitieren
#10
Brierley schrieb:[sdl]
fullresolution=Default
Statt Default kommt hier 640x480 hin.

Brierley schrieb:[autoexec]
mount C "C:\" -ioctl
mount D "E:\" -t cdrom -ioctl
D:
cd\
cd DSAIII~4\DATA\
loadfix -64 RIVA_WIN.EXE
exit
Editiere die Conf mit Notepad und ersetze die Einträge im Abschnitt [autoexec] wie folgt:

mount C "C:\" -ioctl
mount D "E:\" -t cdrom -ioctl
C:
cd\
cd RIVA\
RIVA.EXE
exit
Zum NLT-Wiki: http://nlt-wiki.crystals-dsa-foren.de/doku.php , Zum Drakensang-Wiki: http://drakensang-wiki.crystals-dsa-foren.de/doku.php
KEIN SUPPORT per E-Mail, PN, IRC, ICQ! Lest die Regeln und benutzt das Forum für sämtliche Anfragen! KEINE persönliche Betreuung!
Zitieren
#11
hab alles so gemacht. jetzt zeigt er mir an, dass eine zur installation benötigte datei nicht gefunden werden kann : DATA\FIGHT.SMK
die ist aber da...
Zitieren
#12
Kopiere diese Datei von der CD nochmal auf die Platte ins DATA-Verzeichnis.

Wie hattest du Riva installiert? Direkt über Windows oder unter DOSBox?
Zum NLT-Wiki: http://nlt-wiki.crystals-dsa-foren.de/doku.php , Zum Drakensang-Wiki: http://drakensang-wiki.crystals-dsa-foren.de/doku.php
KEIN SUPPORT per E-Mail, PN, IRC, ICQ! Lest die Regeln und benutzt das Forum für sämtliche Anfragen! KEINE persönliche Betreuung!
Zitieren




Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste